Multifunctional Lubricating Oil Vacuum Oil Purifier
The product can quickly and effectively remove water, gas, impurities and volatiles (such as alcohol, gasoline, ammonia, etc.) in the oil, and restore the viscosity, flash point and performance of the oil. The treated lubricant has low emulsification value, very low water content and high impurity precision, and can be reused repeatedly in high precision hydraulic lubrication equipment at home and abroad.
Product Details：Multifunctional Lubricating Oil Vacuum Oil Purifier
The machine can effectively remove iron filings, dust, impurities, water and harmful compounds from the oil, as well as organic and inorganic acids from the oil, restoring the performance of the lubricant.
PARAMETER：
Item | Unit L/min | TY-10 | TY-20 | TY-30 | TY-50 | TY-100 | TY-150 | TY-200 | TY-300 | |
Flow Rate | 10 | 20 | 30 | 50 | 100 | 150 | 200 | 300 | ||
Vacuum Range | MPa | -0.06~-0.095 | ||||||||
Working pressure | MPa | ≤0.4 | ||||||||
Temperature Range | ℃ | 20~80 | ||||||||
Power Supply | / | 380V／50HZ（at user＇s option） | ||||||||
Nois0 | dB(A) | ≤65～80（depend on user＇s requirement） | ||||||||
Fault-free working hours | h | ≥4000 | ||||||||
Continuous working hours | h | ≥150 | ||||||||
Heating power | Kw | 18 | 18 | 18 | 30 | 45 | 54 | 72 | 96 | |
Total Power | Kw | 20 | 20 | 20 | 32 | 50 | 09 | 80 | 105 | |
Inlet(outlet) Diameter | mm | Φ25 | Φ25 | Φ25 | Φ32 | Φ42 | Φ50 | Φ50 | 09Φ | |
Weight | kg | 400 | 450 | 500 | 009 | 800 | 1000 | 1100 | 1550 | |
Index After Filtration | Mater Content | ppm | ≤50 | |||||||
Gas Content | % | ≤0.1 | ||||||||
Cleanliness | / | ≤NAS 6 Grade | ||||||||
1. Applicable scenarios：
Commercial and residential power supply: Commercial buildings and residential areas are used to reduce electricity from the power company's distribution network to a voltage suitable for end-users.
Power plant: Within the power plant, the electricity generated by the generator is boosted to a high voltage suitable for transmission.
Railway and Rail Transit: Used to supply power to the electric drive systems of railway and rail transit systems.
2. Main Feature:
(1) Strong ability to filter out impurities: the large-area, deep precision filter material can remove fine particles in the oil.
(2) Automatic backwashing function: automatically cleans a large number of impurities retained by the filter.
(3) Advanced medium heat-absorbing condensation system.
(4) The lubricating oil filter is set up with pressure protection, automatic temperature control and heating, automatic separation of condensate device, and drainage in rewire operation, which is simple, safe and reliable.
(5) the use of high-quality filter material, large dirt-holding capacity, corrosion resistance, high temperature resistance, high mechanical strength, in addition to high impurity accuracy, long service life.
(6) Unique degassing and dewatering system: adopting three-dimensional evaporation technology, multi-level oil-water separation technology, rapidly separating water, gas and impurities in the oil.
3. Operation Matters:
(1) When the vacuum pump is working, attention should be paid to the oil condition shown by the oil scale (the oil should be on the oil scale line), if the vacuum pump oil is found to have more water or is too dirty, it should be replaced in time so as not to affect the service life of the vacuum pump.
(2) When more water is found in the cooler memory during operation, it should be discharged in time.
(3) The initial filter screen should be often removed and cleaned to keep clean, so as not to clog and cause insufficient oil or high pressure. When the oil filter is found to feed oil into the small, indicating that the primary filter mesh impurities increase, need to be cleaned immediately.
(4) Run at any time to pay attention to the pump and the corresponding motor noise is normal, if found abnormal should be removed immediately, so as not to burn the motor or affect the life of the pump.
(5) When the machine is not in use, the vacuum pump oil should be drained and injected with new oil.
4. Maintenance Method:
(1) When the running vacuum oil filter needs to interrupt the operation, it should be disconnected from the heating power supply for 5min before stopping the operation of the inlet and outlet oil pumps, in order to prevent the local thermal decomposition of the oil in the oil circuit and the production of hydrocarbon gases.
(2) After working in the outdoor low-temperature environment, the vacuum pump must be released to the condenser and the cooling water tank in the water to prevent damage to the equipment by low-temperature icing.
(3) When the oil filter is not in use, the dirty oil in the vacuum pump should be drained and injected with new oil.
(4) Should regularly check the vacuum oil filter condenser and heater. Dirt gathered in the condenser heat pipe can be blown with compressed air to prevent the decrease of heat exchange capacity:If the heating element of the electric heater is found to have carbon deposits on the surface, the cause should be identified and eliminated in order to improve the heating efficiency of the heater.
CASES
Own Factory
Employees at Working
Transportation
SERVICE
Service philosophy
Flexibility: Receive customers in a clean and efficient manner, and gain customer trust with a flexible and clever work attitude.
Customer Relationship Philosophy
Quick: Refers to "quick action", which has two meanings: one is physical speed, that is, try to work as fast as possible and not make customers wait long; The second is the speed of the demonstration. The sincere actions and considerate heart of the employees can arouse customer satisfaction, making them not feel that the waiting time is too long. They can express vitality with quick actions, and not letting customers wait is an important measure of service quality.
FAQ：
Q:What was the original intention of the company's establishment?
A:The original intention of the company's establishment is to provide innovative and high-quality products and services to the market, meet customer needs, and strive to become a leading enterprise in the industry.
Q:What are the company's requirements for the team?
A:Innovation ability: Encourage team members to propose new ideas and solutions, and drive the continuous development and progress of the company.
Teamwork ability: Emphasize teamwork, promote communication and collaboration between departments, and work together to complete projects.
Sense of responsibility: Require team members to take responsibility for their work and contribute to the development of the company.
Q:What is the current ranking and position of the company in the industry?
A:At present, we are in the top 10 or market leadership position in the industry. We have won widespread recognition from customers with our high-quality products and services.
